How to Flash Using Smart Phone SP Flash Tool

Hot To use Smart Phone Flash Tool

Step 1: Download and Install Android USB Driver on your computer. If Android USB Drivers are already installed on your computer then skip this step.Step 2: Power Off your Android Smartphone and remove the battery (if it is removable).Step 3: Download the Firmware or Custom Rom that you want to Flash on your Android Smartphone and extract it on your computer.Step 4: Download and Extract Smart Phone Flash Tool on Your Computer. After Extracting you will be able to see the following files:Step 5: Now open sp flash tools exe (you will find this from the extracted files inStep 6: When Smartphone Flash Tool is launched then Click on the Download Tab.Step 7: In the Download Tab, now click on the scatter-loading Button.Step 8: Now, Locate the Scatter File (you will find the scatter file in the Stock Rom folder).Step 9: Then Click on the Download Button to begin the Flashing Process.Step 10: Now, connect your Smartphone to the computer using USB Cable (without battery-if it removable). After Connecting the Device to the computer Press Volume Down or Volume Up keys, so that your computer easily detect your Smartphone.Step 11: Once Flashing is completed, a Green Ring will appear.Step 12: Close the Smartphone Flash Tool on your Computer and disconnect your Android Smartphone from the computer.Congratulations, Now you Android Smartphone successfully running the Stock Rom which you have downloaded.
Click Here to Leave a Comment Below 0 comments

Leave a Reply:

Optimization WordPress Plugins & Solutions by W3 EDGE